Click here to view all flavours

Joyetech eGrip 20W Maximize

Joyetech eGrip 20W

Availability: In Stock

971 Items in stock

£ 47.00 tax incl.

The eGrip is Joyetech’s first in-built atomizer e cigarette. It features a transparent e liquid window on the ide allowing you to visually see how much e liquid is in it as well as a 360-degree regulation ring to adjust output wattage from 8W-20W). Its an amazing performer and definitely a success from one of the leading e cig manufacturers.

The air flow can be adjusted, to suit your preferred draw, using a special tool. The eGrip also utilises its dedicated atomizer head, the eGrip CS head (1.5 ? resistance) which complements its high output.


The eGrip is the perfect size to fit in your hand, small enough to be discreet and stylish enough to stand out from the vaping crowd. The performance is second to none using the special CS 1.5oHm atomizer head.


The eGrip Features:
20W High Output

1500mAH fixed battery

Adjustable Air Inflow

Unique Appearance

Compact Size

High-end material

3.6ml E Liquid capacity

Joyetech eGrip 20W Kit Includes:
1× eGrip Mouthpiece

1× eGrip Body

2× eGrip CS Atomizer Heads

1× eGrip Atomizer Base

1× 1A Wall Adaptor

1× USB Cable

1× Manual & Warranty Card

How To Use The Joyetech eGrip:

VW mode (MAX 20W)

Rotate the regulation ring clockwise or counterclockwise to increase or decrease the wattage which in turn will affect the draw and vapour production

eGrip Airflow Control

Spin the adjustable screw on the side of the bottom. Counter-clockwise will loosen the screw. The looser the screw is, the bigger the air inlet is.

Filling The eGrip

On the side of the eGrip body slide/push up the lid and squeeze your e liquid in till its full. When you have finished filling with e liquid lock the cap back down.

Replacing The eGrip Atomizer Head

Located on the bottom of the Joyetech eGrip is a large screw, unscrew this and the atomizer head will be on the base, simply unscrew the atomizer head and replace with the new one and then screw back into position.

Charging The eGrip

Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adapter or other power source such as a computer. (It can be used whilst on charge)

The eGrip is Joyetech’s first in-built atomizer e cigarette. It features a transparent e liquid window on the ide allowing you to visually see how much e liquid is in it as well as a 360-degree regulation ring to adjust output wattage from 8W-20W). Its an amazing performer and definitely a success from one of the leading e cig manufacturers.

The air flow can be adjusted, to suit your preferred draw, using a special tool. The eGrip also utilises its dedicated atomizer head, the eGrip CS head (1.5 ? resistance) which complements its high output.


The eGrip is the perfect size to fit in your hand, small enough to be discreet and stylish enough to stand out from the vaping crowd. The performance is second to none using the special CS 1.5oHm atomizer head.


The eGrip Features:
20W High Output

1500mAH fixed battery

Adjustable Air Inflow

Unique Appearance

Compact Size

High-end material

3.6ml E Liquid capacity

Joyetech eGrip 20W Kit Includes:
1× eGrip Mouthpiece

1× eGrip Body

2× eGrip CS Atomizer Heads

1× eGrip Atomizer Base

1× 1A Wall Adaptor

1× USB Cable

1× Manual & Warranty Card

How To Use The Joyetech eGrip:

VW mode (MAX 20W)

Rotate the regulation ring clockwise or counterclockwise to increase or decrease the wattage which in turn will affect the draw and vapour production

eGrip Airflow Control

Spin the adjustable screw on the side of the bottom. Counter-clockwise will loosen the screw. The looser the screw is, the bigger the air inlet is.

Filling The eGrip

On the side of the eGrip body slide/push up the lid and squeeze your e liquid in till its full. When you have finished filling with e liquid lock the cap back down.

Replacing The eGrip Atomizer Head

Located on the bottom of the Joyetech eGrip is a large screw, unscrew this and the atomizer head will be on the base, simply unscrew the atomizer head and replace with the new one and then screw back into position.

Charging The eGrip

Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adapter or other power source such as a computer. (It can be used whilst on charge)

Write your review

Joyetech eGrip 20W

Joyetech eGrip 20W

The eGrip is Joyetech’s first in-built atomizer e cigarette. It features a transparent e liquid window on the ide allowing you to visually see how much e liquid is in it as well as a 360-degree regulation ring to adjust output wattage from 8W-20W). Its an amazing performer and definitely a success from one of the leading e cig manufacturers.

The air flow can be adjusted, to suit your preferred draw, using a special tool. The eGrip also utilises its dedicated atomizer head, the eGrip CS head (1.5 ? resistance) which complements its high output.


The eGrip is the perfect size to fit in your hand, small enough to be discreet and stylish enough to stand out from the vaping crowd. The performance is second to none using the special CS 1.5oHm atomizer head.


The eGrip Features:
20W High Output

1500mAH fixed battery

Adjustable Air Inflow

Unique Appearance

Compact Size

High-end material

3.6ml E Liquid capacity

Joyetech eGrip 20W Kit Includes:
1× eGrip Mouthpiece

1× eGrip Body

2× eGrip CS Atomizer Heads

1× eGrip Atomizer Base

1× 1A Wall Adaptor

1× USB Cable

1× Manual & Warranty Card

How To Use The Joyetech eGrip:

VW mode (MAX 20W)

Rotate the regulation ring clockwise or counterclockwise to increase or decrease the wattage which in turn will affect the draw and vapour production

eGrip Airflow Control

Spin the adjustable screw on the side of the bottom. Counter-clockwise will loosen the screw. The looser the screw is, the bigger the air inlet is.

Filling The eGrip

On the side of the eGrip body slide/push up the lid and squeeze your e liquid in till its full. When you have finished filling with e liquid lock the cap back down.

Replacing The eGrip Atomizer Head

Located on the bottom of the Joyetech eGrip is a large screw, unscrew this and the atomizer head will be on the base, simply unscrew the atomizer head and replace with the new one and then screw back into position.

Charging The eGrip

Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adapter or other power source such as a computer. (It can be used whilst on charge)

Write your review

Cart  

No products

£ 0.00 Shipping
£ 0.00 Total

Cart Checkout

Tags



News Blog

Definitive Guide For The Top 5 Clearomizer Tanks
28/05/2014
In 2014 the choice available for clearomizer tanks is...

Care for your clearomizer
13/11/2013
Ecigerettes are trending. We're seeing more and more...


E Liquid Flavour Consultant
08/11/2013
The new in-house brand of eliquid by The Vape Shop is...

EU Rejects E Cigarette Restrictions
08/11/2013
As the fight for consumer rights strengthens regarding...

» All blog's posts

Join us on Facebook !

"Like" our Facebook fan page and join the community. To thank you, you will get a 1€ voucher available immediatly.