Click here to view all flavours

iTaste VV4 Maximize

iTaste VV4

iTaste VV4

Availability: In Stock

995 Items in stock

£ 29.00 tax incl.

The iTaste VV4 battery is the newest in the line of best selling Innokin Technology and features a wider range of Variable Voltage, Variable Wattage, advanced safety features and also ‘pass-through charging.

iTaste VV4 Features:


Battery Level Indicator:

The iTaste VV4 battery capacity is displayed via green, yellow and red LED lights.

Green  = Almost fully Charged. When the iTaste VV4 is fully recharged the LED light will power off.

Yellow = Half Power.

Red  = Low Power. Charge the VV4.

Variable Voltage:

Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Large Capacity:

The iTaste VV4 e cigarette has a built-in 1000 mAh polymer Li-Ion rechargeable battery.

ON/OFF Switch:

Press the power button three times in rapid succession to turn on the iTaste VV4. Once the iTaste VV4 is On hold down the power button to activate the atomizer and vape. When the iTaste VV4 is not in use, press the power button three times in succession to power off the iTaste VV4 Advanced Personal Vaporizer. Always power off the iTaste VV4 Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.

 

SAFETY:

10 Second Cut-Off:

If the activation button is held for 10 seconds or longer the iTaste VV4 Advanced Personal Vaporizer will stop firing until the button is released and pressed again.

Low Voltage Warning:

The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste VV4 Advanced Personal Vaporizer will power off automatically.

Short Circuit/Atomizer Protection:

Short Circuit/Atomizer Protection protects the iTaste VV4 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste VV4 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.8 the Ohms bar will blink.

If there is a short circuit the VV4 screen will display the following and the LED light will power off.

Over-Discharge Protection:

The iTaste VV4 Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.

High compatibility 510/ego connector:

Threads are compatible with the following clearomizers: iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30s, iClearX.I. Gladius and other standard 510 threading.

iTaste VV4 Technical Specifications:

Variable Voltage:

Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Standby current: 50uA max

Maximum output current?4.0A

Charging: Micro USB DC5.0V/500mA

Short Circuit Protection: 0.8 Ohm

The iTaste VV4 battery is the newest in the line of best selling Innokin Technology and features a wider range of Variable Voltage, Variable Wattage, advanced safety features and also ‘pass-through charging.

iTaste VV4 Features:


Battery Level Indicator:

The iTaste VV4 battery capacity is displayed via green, yellow and red LED lights.

Green  = Almost fully Charged. When the iTaste VV4 is fully recharged the LED light will power off.

Yellow = Half Power.

Red  = Low Power. Charge the VV4.

Variable Voltage:

Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Large Capacity:

The iTaste VV4 e cigarette has a built-in 1000 mAh polymer Li-Ion rechargeable battery.

ON/OFF Switch:

Press the power button three times in rapid succession to turn on the iTaste VV4. Once the iTaste VV4 is On hold down the power button to activate the atomizer and vape. When the iTaste VV4 is not in use, press the power button three times in succession to power off the iTaste VV4 Advanced Personal Vaporizer. Always power off the iTaste VV4 Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.

 

SAFETY:

10 Second Cut-Off:

If the activation button is held for 10 seconds or longer the iTaste VV4 Advanced Personal Vaporizer will stop firing until the button is released and pressed again.

Low Voltage Warning:

The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste VV4 Advanced Personal Vaporizer will power off automatically.

Short Circuit/Atomizer Protection:

Short Circuit/Atomizer Protection protects the iTaste VV4 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste VV4 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.8 the Ohms bar will blink.

If there is a short circuit the VV4 screen will display the following and the LED light will power off.

Over-Discharge Protection:

The iTaste VV4 Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.

High compatibility 510/ego connector:

Threads are compatible with the following clearomizers: iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30s, iClearX.I. Gladius and other standard 510 threading.

iTaste VV4 Technical Specifications:

Variable Voltage:

Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Standby current: 50uA max

Maximum output current?4.0A

Charging: Micro USB DC5.0V/500mA

Short Circuit Protection: 0.8 Ohm

Write your review

iTaste VV4

iTaste VV4

The iTaste VV4 battery is the newest in the line of best selling Innokin Technology and features a wider range of Variable Voltage, Variable Wattage, advanced safety features and also ‘pass-through charging.

iTaste VV4 Features:


Battery Level Indicator:

The iTaste VV4 battery capacity is displayed via green, yellow and red LED lights.

Green  = Almost fully Charged. When the iTaste VV4 is fully recharged the LED light will power off.

Yellow = Half Power.

Red  = Low Power. Charge the VV4.

Variable Voltage:

Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Large Capacity:

The iTaste VV4 e cigarette has a built-in 1000 mAh polymer Li-Ion rechargeable battery.

ON/OFF Switch:

Press the power button three times in rapid succession to turn on the iTaste VV4. Once the iTaste VV4 is On hold down the power button to activate the atomizer and vape. When the iTaste VV4 is not in use, press the power button three times in succession to power off the iTaste VV4 Advanced Personal Vaporizer. Always power off the iTaste VV4 Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.

 

SAFETY:

10 Second Cut-Off:

If the activation button is held for 10 seconds or longer the iTaste VV4 Advanced Personal Vaporizer will stop firing until the button is released and pressed again.

Low Voltage Warning:

The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste VV4 Advanced Personal Vaporizer will power off automatically.

Short Circuit/Atomizer Protection:

Short Circuit/Atomizer Protection protects the iTaste VV4 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste VV4 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.8 the Ohms bar will blink.

If there is a short circuit the VV4 screen will display the following and the LED light will power off.

Over-Discharge Protection:

The iTaste VV4 Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.

High compatibility 510/ego connector:

Threads are compatible with the following clearomizers: iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30s, iClearX.I. Gladius and other standard 510 threading.

iTaste VV4 Technical Specifications:

Variable Voltage:

Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

Variable Wattage:

Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

Standby current: 50uA max

Maximum output current?4.0A

Charging: Micro USB DC5.0V/500mA

Short Circuit Protection: 0.8 Ohm

Write your review

Cart  

No products

£ 0.00 Shipping
£ 0.00 Total

Cart Checkout

Tags



News Blog

Definitive Guide For The Top 5 Clearomizer Tanks
28/05/2014
In 2014 the choice available for clearomizer tanks is...

Care for your clearomizer
13/11/2013
Ecigerettes are trending. We're seeing more and more...


E Liquid Flavour Consultant
08/11/2013
The new in-house brand of eliquid by The Vape Shop is...

EU Rejects E Cigarette Restrictions
08/11/2013
As the fight for consumer rights strengthens regarding...

» All blog's posts

Join us on Facebook !

"Like" our Facebook fan page and join the community. To thank you, you will get a 1€ voucher available immediatly.