Click here to view all flavours

 iTaste MVP3.0 Maximize

iTaste MVP3.0

The iTaste MVP3.0 is the newest in the line of internationally bestselling iTaste MVP vaporizers. The iTaste MVP3.0 features a greater range of Variable...

More details

Availability: In Stock

994 Items in stock

£ 49.00 tax incl.

The iTaste MVP3.0 is the newest in the line of internationally bestselling iTaste MVP vaporizers. The iTaste MVP3.0 features a greater range of Variable Voltage, Variable Wattage, advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology. 

This box mod has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB charging cable. It aslo has a variable voltage range of 3.0 – 9.0 volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 – 30.0 Watts, adjustable in 0.5 watts increments. 

 

The Primary Features of The iTaste MVP3.0

Battery Level Indicator:

The iTaste MVP3.0 e cgiarette battery has a tri-color LED on the top.

Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off.

Yellow = Half Power.

Red = Low Power. Charge the MVP3.0. 

Variable Voltage:
Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments. 

Variable Wattage:
Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.

Low Voltage Warning:
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off. 

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on. 

‘Vape while charging’ Technology

The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.  

Remembers last Voltage or Wattage setting:
When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on.  

Portable power source for electronic products:
To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.  

High compatibility 510 connector:
The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M.

Technical Specifications:

Operating Voltage:    3.0V-9 V

Operating Wattage:   6.0W-.30W

Standby current: 100uA max

Maximum output Wattage: 30W

Maximum output Current?10A

Maximum output Voltage: 9V

Clearomizer Resistance: 0.4 Ohm (minimum)

Battery: Built-in 3800 mAh polymer Li-Ion rechargeable battery.

Charging: Micro USB DC5V/1A 

OUTPUT port ?DC5V /1A

The iTaste MVP3.0 is the newest in the line of internationally bestselling iTaste MVP vaporizers. The iTaste MVP3.0 features a greater range of Variable Voltage, Variable Wattage, advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology. 

This box mod has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB charging cable. It aslo has a variable voltage range of 3.0 – 9.0 volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 – 30.0 Watts, adjustable in 0.5 watts increments. 

 

The Primary Features of The iTaste MVP3.0

Battery Level Indicator:

The iTaste MVP3.0 e cgiarette battery has a tri-color LED on the top.

Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off.

Yellow = Half Power.

Red = Low Power. Charge the MVP3.0. 

Variable Voltage:
Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments. 

Variable Wattage:
Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.

Low Voltage Warning:
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off. 

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on. 

‘Vape while charging’ Technology

The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.  

Remembers last Voltage or Wattage setting:
When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on.  

Portable power source for electronic products:
To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.  

High compatibility 510 connector:
The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M.

Technical Specifications:

Operating Voltage:    3.0V-9 V

Operating Wattage:   6.0W-.30W

Standby current: 100uA max

Maximum output Wattage: 30W

Maximum output Current?10A

Maximum output Voltage: 9V

Clearomizer Resistance: 0.4 Ohm (minimum)

Battery: Built-in 3800 mAh polymer Li-Ion rechargeable battery.

Charging: Micro USB DC5V/1A 

OUTPUT port ?DC5V /1A

Click here to add review !
Grade 
jamie mcbride
2015-10-08

i highly recommend this mod to any new vapor amazing battery life is not as big as it seems fits perfectly in your hand the buttons and controls are so easy to get the hang of i've been vaping te aspire Atlantis on this mod only bought it yesterday and am already in love with it the vapor production is amazing i upgraded from the vision spinner II with the nautilus and you can tell the difference the flavor if phenomenal highly recommend this mod paired up with the Atlantis and amazing customer service in the store thank you for this amazing setup

Write your review

 iTaste MVP3.0

iTaste MVP3.0

The iTaste MVP3.0 is the newest in the line of internationally bestselling iTaste MVP vaporizers. The iTaste MVP3.0 features a greater range of Variable Voltage, Variable Wattage, advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology. 

This box mod has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB charging cable. It aslo has a variable voltage range of 3.0 – 9.0 volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 – 30.0 Watts, adjustable in 0.5 watts increments. 

 

The Primary Features of The iTaste MVP3.0

Battery Level Indicator:

The iTaste MVP3.0 e cgiarette battery has a tri-color LED on the top.

Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off.

Yellow = Half Power.

Red = Low Power. Charge the MVP3.0. 

Variable Voltage:
Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments. 

Variable Wattage:
Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.

Low Voltage Warning:
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off. 

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on. 

‘Vape while charging’ Technology

The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.  

Remembers last Voltage or Wattage setting:
When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on.  

Portable power source for electronic products:
To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.  

High compatibility 510 connector:
The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M.

Technical Specifications:

Operating Voltage:    3.0V-9 V

Operating Wattage:   6.0W-.30W

Standby current: 100uA max

Maximum output Wattage: 30W

Maximum output Current?10A

Maximum output Voltage: 9V

Clearomizer Resistance: 0.4 Ohm (minimum)

Battery: Built-in 3800 mAh polymer Li-Ion rechargeable battery.

Charging: Micro USB DC5V/1A 

OUTPUT port ?DC5V /1A

Write your review

Cart  

No products

£ 0.00 Shipping
£ 0.00 Total

Cart Checkout

Tags



News Blog

Definitive Guide For The Top 5 Clearomizer Tanks
28/05/2014
In 2014 the choice available for clearomizer tanks is...

Care for your clearomizer
13/11/2013
Ecigerettes are trending. We're seeing more and more...


E Liquid Flavour Consultant
08/11/2013
The new in-house brand of eliquid by The Vape Shop is...

EU Rejects E Cigarette Restrictions
08/11/2013
As the fight for consumer rights strengthens regarding...

» All blog's posts

Join us on Facebook !

"Like" our Facebook fan page and join the community. To thank you, you will get a 1€ voucher available immediatly.